Non-Contact Radar Level Transmitter
CIMFR/PESO
CE
STQC|ERTL
HART
LEVEL TRANSMITTER

Non-Contact Radar Level Transmitter

501E series radar level transmitters are intelligent non-contact level measuring instruments with th...

Key Specifications

Measuring range: 10/35m/85m/120m
Accuracy: ±3mm
Process connection: thread, flange with a universal joint
Process temperature: -40 - +250℃
Process pressure: atmospheric
Operating frequency: 26GHz / 80GHz
Signal output: 4 - 20mA/HART protocol
Power supply: 24V DC two-wire/four-wire; 220V AC four-wire
Display: LCD Display Meter
Enclosure: SS304/Cast Al x IP66 or I-safe/Exd IIC

501E series radar level transmitters are intelligent non-contact level measuring instruments with their working frequency of 26GHz & 80GHz, which output 4 - 20 mA analog signals. Their maximum measuring range is 120 meters. The antenna has been further optimized, and the new fast microprocessor can perform higher-speed signal analysis and processing, so that the instrument can be used for level measurement of other very complex conditions, such as different kinds of process storage tanks, reactors (reaction kettle) and solid silos, etc.

Advantages

Noncontact measurement, no wear, no contamination;

The antenna size is small, and easy to be installed;

Shorter wavelength, better reflection on inclined solid surfaces;

The upper dead zone is smaller, and they are more suitable even for the level measurement in small storage tanks;

The beam angle is small and the energy is concentrated, which not only enhances the echo capability, but also helps to avoid interference from a possible obstacle;

Almost unaffected by corrosive vapors and foam;

Almost unaffected by changes of water vapor, temperature, and pressure in the atmosphere;

The instrument in severe dust environment can also accurately read the real echoes from the actual level;

Having high signaltonoise ratio, can keep better performance even under fluctuating conditions;

80GHz frequency radar level transmitter is the best choice for measuring solid level and low dielectric constant liquid level. Be suitable for the level measurements of those measured mediums which dielectric constants are respectively ≥1.8.

The radar level meter transmits a continuous radar wave signal from its antenna. This signal is a frequency modulated continuous wave, referred to as FMCW. There is a frequency difference between the continuous wave emitted from the radar level transmitter’s antenna and the echo returned from the top surface of a measured medium. The difference is proportional to the distance between the reference plane of the antenna and the top surface of the medium. After the electronic components receive the echoes, the signals of the echoes undergo the special processing such as Fourier transform (FT), the unique high-precision algorithms are used during the processing, so that the instrument can accurately measure the level of the medium.

monitoring levels in open channels, reservoirs, dams, and sewer systems, storage tanks containing corrosive, volatile, or aggressive chemicals, silos and bins.

Specifications

Measuring range 10/35m/85m/120m
Accuracy ±3mm
Process connection thread, flange with a universal joint
Process temperature -40 - +250℃
Process pressure atmospheric
Operating frequency 26GHz / 80GHz
Signal output 4 - 20mA/HART protocol
Power supply 24V DC two-wire/four-wire; 220V AC four-wire
Display LCD Display Meter
Enclosure SS304/Cast Al x IP66 or I-safe/Exd IIC

Certifications

CIMFR/PESO
CE
STQC|ERTL
HART

Request a Catalogue

Fill in your details and we'll send the full product catalogue to you.





    Ready to Solve Your Process Measurement Challenges?

    If your plant is experiencing measurement inaccuracies, instrument failures, or maintenance challenges — our engineering team is ready to help you find the right solution.

    Contact Our Engineering Team
    [email protected] +91-11-40521811 www.vautomat.com Regd. Off.: F-61, Pocket F, Okhla Industrial Area